From: videokid400 on 15 Apr 2007 23:12 On Mar 28, 2:29 am, marvins...(a)yahoo.com wrote: > On Mar 24, 8:00 am, Murray <mur...(a)work.com> wrote: > > > > > > > On 23 Mar 2007 13:26:05 -0700, "Daniel" <nospampls2...(a)yahoo.com> > > wrote: > > > >Murray wrote: > > > Found the bushings on line for $50 +- a set, is it worth paying > > >> for a Tech to do it or just do it my self? > > >> Anyone else here done the job. > > >== > > >Would be interested to hear how this goes. > > >Had always heard the bushings are not replaceable but you need to > > >change the control arm. > > >I imagine you would need a press of some kind, but when I changed the > > >control arms on the Gen. 3, I was glad I didn't have to press in any > > >bushings. Did not look like a simple job. Plus my supposedly 600 ft. > > >lbs. air gun would not budge those control arm mounting bolts. The > > >threaded ends were inside the frame tubing where penetrating oil could > > >not reach. > > > I was hoping someone here had experience with the project, I have > > found the bushings available so there must be a way to install them. > > > Murray > > I had a passenger side contol arm bushing fail in my '86 Camry in > 1995. The busing is molded into the lower control arm which is mounted > to the fram of the car with a bolt whose nut is hidden in an acess > hole in the frame. The bolt was rusted solid to the steel bushing in > the control arm and would not budge even with a professional air > driven impact wrench. I gave to a shop that succeeded in getting the > bolt free of the steel bushing in the rubber of the controll arm when > being cut with a sawsall. The vibration of the sawsall managed to free > the rusted bolt. For more info e-mail me at > marvin.s...(a)yahoo.com(remove the dot after marvin). > > Marvin- Hide quoted text - > > - Show quoted text - This is a very easy job in a fully equiped workshop with the press tool required. The press is one thing the tooling another. Camry control arm jig when I bought mine was $670 Aus. If you dont have acess to one , leave it to someone who does. dave
First
|
Prev
|
Pages: 1 2 Prev: oil questions (5W-30 vs 10W-30) Next: CHANGE OUT THE REAR SPEAKERS IN A1994 TOYOTA CAMRY |