From: wallman on
I have just changed my oil and filter on 08 Tacoma, 6 cyl. 6 speed, 2 wheel
drive. How do I turn off the maintenance required light? Thanks in
advance...........


From: Paul. on
Did you look in your owners manual? That's where the directions are.

"wallman" <fos-ter(a)pacbell.net> wrote in message
news:aY9Oj.3039$h75.2542(a)newssvr27.news.prodigy.net...
>I have just changed my oil and filter on 08 Tacoma, 6 cyl. 6 speed, 2 wheel
>drive. How do I turn off the maintenance required light? Thanks in
>advance...........
>


From: Jeff Strickland on
The Owner's Manual describes the procedure perfectly, I do it somewhat less.

Press the Trip/Odometer button until the odo is displayed. Turn the Ignition
ON while holding the odo button depressed.

As I said, the owner's manual tells you how to do this, I think I told you
correctly, but I might have left out a step.




"wallman" <fos-ter(a)pacbell.net> wrote in message
news:aY9Oj.3039$h75.2542(a)newssvr27.news.prodigy.net...
>I have just changed my oil and filter on 08 Tacoma, 6 cyl. 6 speed, 2 wheel
>drive. How do I turn off the maintenance required light? Thanks in
>advance...........
>

From: bearman on

"Jeff Strickland" <crwlr(a)verizon.net> wrote in message
news:VqpOj.268$Ux4.195(a)trnddc07...
> The Owner's Manual describes the procedure perfectly, I do it somewhat
> less.
>
> Press the Trip/Odometer button until the odo is displayed. Turn the
> Ignition ON while holding the odo button depressed.
>
> As I said, the owner's manual tells you how to do this, I think I told you
> correctly, but I might have left out a step.


In other words, read the manual.

--
Bearman

America: Land of the free because of the brave.